Calculeter guide

Cubic Yard Calculator

VOLUME • EXTRA MATERIAL • COST

Cubic Yard Calculator

Estimate soil, gravel, mulch, concrete and other bulk material with flexible units and clear calculation steps.

✓ Four project shapes
1 cubic yard = 27 cubic feetEnter each measurement in its own unit—the calculator converts everything automatically.
01

Enter project measurements

Volume = length × width × depth

Your measurements stay in the browser and are not submitted or stored.

CLEAR CALCULATION METHOD

How to calculate cubic yards

Start by finding volume in one consistent unit. The calculator converts every entered measurement to yards, applies the correct shape formula, then adds the selected extra-material percentage.

RECTANGLE

Length × width × depth

V = L × W × D

Use for garden beds, driveways, slabs, trenches and rectangular excavations.

KNOWN AREA

Area × depth

V = A × D

Useful when square footage or square metres have already been calculated.

CIRCLE

Pi × radius² × depth

V = π × (d ÷ 2)² × D

Use the full diameter for circular pads, planters or holes.

TRIANGLE

Base × length × depth ÷ 2

V = B × L × D ÷ 2

Use for a triangular footprint with a consistent material depth.

If all measurements are in feet, calculate cubic feet first and divide by 27. When depth is in inches, divide it by 12 before multiplying.

Cubic yard conversion table

Starting volumeEquivalent to 1 cubic yardConversion to cubic yards
Cubic feet27 ft³ft³ ÷ 27
Cubic inches46,656 in³in³ ÷ 46,656
Cubic metres0.764554858 m³m³ × 1.30795062
Litres764.554858 Llitres ÷ 764.554858

Linear, square and cubic units are different. A square yard measures area; a cubic yard measures three-dimensional volume.

Choosing an extra-material allowance

0%Measured geometric volume only

Useful for checking the raw calculation before planning an order.

5%Simple, accurately measured projects

May cover small measurement and handling differences.

10%Common planning allowance

Often used for uneven grade, spillage or modest compaction.

15%+Irregular or uncertain conditions

Confirm with the installer or supplier before using a large allowance.

These percentages are planning examples, not fixed rules. Loose soil, aggregate and mulch can settle or compact differently, while excavation dimensions may vary across a site.

Worked cubic yard example

Length12 ft
Width10 ft
Depth4 in = 0.333 ft
Volume in cubic feet12 × 10 × 0.333 = 40 ft³
Measured cubic yards40 ÷ 27 = 1.481 yd³
10% allowance1.481 × 1.10 = 1.630 yd³
Suggested quarter-yard order-up1.75 cubic yards

The supplier may sell only whole or half yards, impose a minimum order, or recommend a different allowance.

Before ordering bulk material

  1. Measure more than once.For irregular areas, split the project into smaller rectangles or circles and add their volumes.
  2. Check depth in several places.A changing grade can make one depth measurement misleading.
  3. Ask about compaction.Compacted base material may need a different loose-delivery quantity.
  4. Confirm delivery units.Verify whether the supplier prices by cubic yard, tonne, bag, truckload or another unit.

Cubic yard calculator FAQs

How many cubic feet are in one cubic yard?

One cubic yard contains exactly 27 cubic feet because a yard is 3 feet and 3 × 3 × 3 equals 27.

How do I calculate cubic yards from feet and inches?

Multiply length in feet by width in feet by depth in feet, then divide cubic feet by 27. Convert inches of depth to feet by dividing by 12. The calculator handles mixed units automatically.

How much extra material should I order?

The best allowance depends on the material, site and supplier. A common planning range is 5% to 10%, but irregular ground, compaction, spillage or excavation variation may require more.

Does a cubic yard calculator account for compaction?

Not automatically. Enter a waste or extra-material percentage that reflects compaction, settlement, uneven excavation and the supplier’s advice.

How do I calculate cubic yards for a circular area?

Find the circle’s area with π × radius squared, multiply by depth, and convert the resulting volume to cubic yards. Enter the full diameter, not the radius.

How do I calculate cubic yards from square feet?

Multiply square feet by depth in feet to obtain cubic feet, then divide by 27. Use the known-area mode to enter square feet and a separate depth unit.

How many cubic metres are in a cubic yard?

One cubic yard equals approximately 0.764555 cubic metres, or about 764.555 litres.

Can I calculate material cost?

Yes. Enter the supplier price per cubic yard. The calculator multiplies that price by the volume after the selected waste allowance and shows the estimate in the chosen currency.

What does the suggested order quantity mean?

It rounds the adjusted volume upward to the next quarter cubic yard. Suppliers use different minimums and increments, so confirm the actual order size before purchasing.

Does this calculator store my project measurements?

No. All calculations run locally in the browser, and the plugin does not submit or save the entered values.