Use local prices: The defaults are editable planning examples, not live quotes. Supplier minimums, delivery distance, access, soil, forms, thickness, reinforcement, finish, and labor can materially change cost.
Concrete slab cost calculator
Enter the slab dimensions, choose ready-mix or bags, then add your local installation costs.
How to calculate concrete slab cost
The estimator first converts the dimensions to feet, calculates surface area and volume, adds a waste allowance, then prices the selected concrete supply and each optional project component.
Slab area
length × width × quantityArea drives base, reinforcement, labor, and finishing costs entered per square foot or square meter.
Concrete volume
area × thickness ÷ 27 = yd³Thickness is converted to feet. There are 27 cubic feet in one cubic yard.
Order quantity
volume × (1 + waste %) → round upReady-mix rounds to the selected yard increment. Bagged concrete rounds to a whole bag.
Total project cost
subtotal + tax + contingencyThe subtotal includes concrete supply and every non-zero installation or fixed-cost field.
A quantity estimate is not a structural design
Thickness, concrete strength, reinforcement, joints, drainage, frost protection, base preparation, and curing should match the project plans, local code, soil, climate, and intended loads.
- Measure inside the forms at several points.
- Confirm truck access and supplier minimums.
- Use a qualified professional when design is uncertain.
20 × 12 foot patio slab, 4 inches thick
The raw volume is 80 cubic feet, or about 2.96 cubic yards. With 10% waste, the required volume is about 3.26 cubic yards and rounds up to 3.50 cubic yards at a 0.25-yard ordering increment.
Ready-mix plus installation allowances
At $160 per cubic yard, $225 combined delivery and short-load fees, the example area rates, $250 equipment, 5% contingency, and no tax, the planning total is $3,228.75. Replace every rate with local written quotes.
What changes the cost of a concrete slab?
Site and access
Demolition, excavation, grading, spoil removal, compacted stone, drainage, tight truck access, long wheelbarrow routes, or a pump can add substantial cost.
Slab specification
Thickness, concrete strength, fibers, rebar, mesh, vapor barrier, insulation, thickened edges, footings, and embedded hardware change both quantity and labor.
Finish and schedule
A basic broom finish differs from polished, stamped, exposed aggregate, colored, sealed, or cold-weather work. Crew size and short-notice scheduling also affect quotes.
Concrete slab cost calculator FAQ
How do I calculate the cost of a concrete slab?
Multiply length by width to find area, multiply area by thickness in feet to find cubic feet, divide by 27 for cubic yards, and add a waste allowance. Price the rounded concrete order, then add delivery, base, reinforcement, forms and placement labor, finishing, equipment, permits, tax, and contingency.
How many cubic yards of concrete do I need?
For a rectangular slab, cubic yards equal length in feet multiplied by width in feet multiplied by thickness in feet, divided by 27. Multiply by the number of identical slabs, add waste, and round up to the supplier’s ordering increment.
How much waste should I add for a concrete slab?
There is no universal allowance. The editable default is 10 percent, but the appropriate amount depends on measurement confidence, subgrade variation, form accuracy, spillage, truck or pump conditions, and supplier guidance.
How does the bagged-concrete estimate work?
The required cubic feet including waste is divided by the editable yield per bag, then rounded up to a whole bag. Multiply the whole-bag quantity by the local price per bag. Verify yield on the exact product because published yields are approximate.
Does the calculator support metric measurements?
Yes. Select metric to enter length and width in meters and thickness in millimeters. The calculator converts those values internally and reports both US customary and metric area and volume.
What is included in the total slab cost?
The estimate can include ready-mix or bagged concrete, delivery and short-load fees where relevant, excavation and base, reinforcement and vapor barrier, forms and placement labor, finishing and curing, equipment, permit, demolition or other fixed costs, tax, and contingency.
Why can the installed cost be much higher than the concrete price?
Concrete material is only one part of the job. Demolition, grading, stone base, compaction, forms, reinforcement, vapor barrier, crew labor, pumps, finishing, joints, curing, sealing, permits, difficult access, and contractor overhead may exceed the concrete material cost.
Are the default prices current local prices?
No. They are editable examples for demonstrating the calculation. Enter current written prices from local ready-mix suppliers, retailers, contractors, equipment providers, and permitting authorities.
Can this calculator determine slab thickness or reinforcement?
No. It prices the dimensions and rates you enter. Required thickness, strength, reinforcement, joints, base, drainage, and frost protection depend on loads, soil, climate, plans, and local code and may require a qualified designer.
Are my slab measurements stored?
No measurements or prices are transmitted or stored by this plugin. Calculations run locally in the browser. Other site software may independently collect ordinary visit information.
Planning estimate: Results are general calculations, not a supplier quote, contractor bid, engineering design, code determination, tax advice, or guarantee. Verify the design and all quantities, prices, fees, and requirements before purchasing or construction.